Description
E600 High-Density EVA Foam Sheets — 60–65° Shore C
The firm, structural grade in our EVA line, now in black at the popular 39″ x 51″ standard size. E600 is the high-density, closed-cell rubber EVA that takes a crisp edge, resists wear, and holds its shape under load — warehoused and shipped from Pacoima, California since 1997.
Why choose Avetco E600
- Firm and hard-wearing. At 60–65° Shore C it cuts clean, sands to a sharp edge, and stands up to repeated handling and load.
- Two thicknesses. Choose 5 mm or 10 mm from the dropdown — same sheet, same black color.
- Consistent, inspected stock. Every container is checked on arrival — uniform thickness and density sheet to sheet.
- Real specs on request. Full manufacturer data sheet and SDS available for production and wholesale buyers.
Best uses
- Structural cosplay armor and high-wear costume pieces
- Firm padding, spacers, gaskets, and protective inserts
- Footwear and orthotic components
- 3D / puff embroidery backing for hats, caps, and patches
- Tooling, jigs, and prototype fabrication
- Signage, displays, and craft projects
Color in stock
Black
Sizes & thickness
- Standard sheet: 39″ x 51″ (99 x 130 cm)
- Thickness options: 5 mm & 10 mm
Technical specifications
| Grade | E600 · Grade A Rubber (60–65° Shore C) |
| Material | Closed-cell Ethylene-Vinyl Acetate (EVA) |
| Sheet size | 39″ x 51″ (99 x 130 cm) standard |
| Thickness | 5 mm & 10 mm |
| Density | 185–215 kg/m³ |
| Tensile strength | 1,400–1,900 kPa |
| Elongation | 150–180% |
| Rebound | 28% |
| Compression set | 29.1% |
| Water absorption | Negligible (closed-cell) |
| Heat-forming | Softens approx. 150–200°F |
Material & compliance
Closed-cell EVA — water-resistant, mildew-resistant, and dimensionally stable. Components are TSCA-listed (Active) and the material is non-hazardous per the manufacturer Safety Data Sheet (OSHA 29 CFR 1910.1200); none of the ingredients are listed under California Proposition 65. Full SDS and data sheet available on request — email Info@Avetcoinc.com.
