1.57″ | 40mm E700 High Density Eva Foam Hardness 70-75° Shore C

Description

E700 High-Density EVA Foam is a closed-cell foam (70–75° Shore C) made from Ethylene Vinyl Acetate and blended copolymers. Chemically cross-linked for a uniform cell structure, it’s semi-rigid, shock-absorbing, and buoyant, with strong resistance to water, UV, and cracking. Easy to shape with heat, glue, and paint, with a smooth finish on both sides, it’s a versatile pick for footwear (midsoles, platforms), sports equipment, packaging, flooring, and cosplay props and costumes. Available in a range of thicknesses and densities.

E700 High-Density EVA Foam is also available in 2 mm through 40 mm — see the full 60-75° Shore C high density range.

Orthotic, orthopedic and diabetic use

At 40mm this is block stock — over an inch and a half, so a whole elevation or a carved shape comes out of one piece with grinding allowance left over. At 70-75° Shore C it stays dimensionally stable under load. Orthopedic footwear makers, prosthetists and shoe repair shops use it for:

• Full shoe elevations built in one piece rather than laminated from sheets
• Prosthetic covers, fill and shaping stock carved to the limb
• Seating, positioning and custom padding where thickness and stability both matter

Closed-cell, so it does not soak up perspiration, and it grinds and bevels to a clean edge. For insole-gauge orthotic work — posting, shells and top covers — the thinner sheets in our 60-75° Shore C high density range are the ones to start from.

Material Data